Differences

This shows you the differences between two versions of the page.

--- services [2016/11/16 08:30]
rubiola [Accredited and Certified Measurements]
+++ services [2019/03/22 14:30]
jmzint [Accredited and Certified Measurements]
@@ Line 1: / Line 1: @@
+^[[Home]]^[[News]]^[[Stability&Noise]]^[[Research]]^[[Services]]^[[Links]]^[[Venue]]^[[Contacts]]^
+====== Services ======
+===== Consulting, Applied Research, and Measurements =====
+Our platform gathers a number of internationally-recognized experts in different fields of Time and Frequency, and cutting-edge equipment.
+Contact us at [[contacts|Contacts]], and explain your problem
+===== Access services (instrumentation, frequency standards, ...) ====
+Below are a few indicative available services and related fees for physical access to
+the platform and its instrumentation.
+Contact us for any details or tailored services you might need.
+==== Platform Access ====
+=== AP1 : access to basic instrumentation and environment ===
+Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation, reception and installation at the facility.
+^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+| Symmetricom 5125 and spectrum analyser  | 100 €     | 200 € / day (8hrs)        |
+| Network analyser  | 100 €     | 200 € / day (8hrs)        |
+| EMC receiver  | 100 €     | 200 € / day (8hrs)        |
+| Phase noise measurement bench  | 150 € | 300 € / day (8hrs)|
+| FSWP (Rohde & Schwarz) + environment devices | 150 € | 450 € / day (8hrs)|
+| Technical assistance and expertise    |      | 80-120 € / hour        |
+=== AP2 : access to high end metrology and advanced instrumentation ===
+Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation, reception and installation at the facility.
+^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+| Access to cryogenic standards  | 500 €     | 400 € / day (8 hrs)        |
+| Acces to optical standards  | 500 €     | 800 € / day (8 hrs)        |
+| Technical assistance and scientific expertise | 100 €     | 100-150  € / hour        |
+==== CRYO1 : Cryogenic standard rental ====
+^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+| 1 cryogenic standard and support instrumentation   | 7 k€ (Transportation, installation)     | 2 k€ / day (8 hrs)        |
+==== Frequency calibration over GNSS service ====
+SYREF2.5
+^ Hardware description      ^ GNSS unit cost        ^ Service (yearly)          ^
+| SYREF v 2.5 GNSS receiver and processing unit | 6 k€      | 4 k€ / year         |
+Service include 12 monthly certificates of calibration, automated data transfer (in and out), data processing, technical support on a 8x5 basis, maintainance and data monitoring. This service is intended to provide the user's local frequency standard with a frequency traceability to UTC via the french national reference UTC(OP) at 1x10<sup>-13</sup> level (after 30 days). This service can be found in our [[http://www.cofrac.fr/annexes/sect2/2-06.pdf|2-06 accredited scope]] (internal procedure PT-54). Contact us for detailed information about the service requirements and operation.
+(This service is covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/en/cipm-mra/objectives.html(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})
+===== Accredited and Certified Measurements ====
+Our lab is affiliated to LNE through the brand LNE-LTFB, which combines the TF Department of the FEMTO-ST Institute and the TF Team of UTINAM (Observatory of Besancon) in a single entity.
+Through the  LNE-LTFB brand, we are at the top level of the French metrological chain for
+    * Phase Noise measurements, i.e. L(f) or Sphi(f)
+    * Frequency Stability (short term, < 100s), i.e., Allan Variance
+Check the complete and up-to-date description of those lines in our [[http://www.cofrac.fr/annexes/sect2/2-13.pdf|2-13 accredited scope]]
+LNE-LTFB also provide accredited certificates of calibration for the following quantities
+  *  time interval
+  *  frequency
+  *  frequency stability (long term > 100s)
+Covered instrumentation include frequency standards, time/frequency counters, pulse generators, chronograph, clock watches.
+The complete and up-to-date description of those lines in our [[http://www.cofrac.fr/annexes/sect2/2-06.pdf|2-06 accredited scope]]
+(Those services are covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/en/cipm-mra/objectives.html|(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})