Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
services [2018/03/05 14:03]
127.0.0.1 external edit
services [2019/03/22 14:30]
jmzint [Accredited and Certified Measurements]
Line 8: Line 8:
 Contact us at [[contacts|Contacts]],​ and explain your problem Contact us at [[contacts|Contacts]],​ and explain your problem
  
 +===== Access services (instrumentation,​ frequency standards, ...) ====
 +Below are a few indicative available services and related fees for physical access to
 +the platform and its instrumentation.
 +Contact us for any details or tailored services you might need.
 +==== Platform Access ====
 +=== AP1 : access to basic instrumentation and environment ===
 +Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation,​ reception and installation at the facility.
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| Symmetricom 5125 and spectrum analyser ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| Network analyser ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| EMC receiver ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| Phase noise measurement bench  | 150 € | 300 € / day (8hrs)|
 +| FSWP (Rohde & Schwarz) + environment devices | 150 € | 450 € / day (8hrs)|
 +| Technical assistance and expertise ​   |      | 80-120 € / hour        |
  
 +=== AP2 : access to high end metrology and advanced instrumentation ===
 +Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation,​ reception and installation at the facility.
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| Access to cryogenic standards ​ | 500 €     | 400 € / day (8 hrs)        |
 +| Acces to optical standards ​ | 500 €     | 800 € / day (8 hrs)        |
 +| Technical assistance and scientific expertise | 100 €     | 100-150 ​ € / hour        |
  
 +==== CRYO1 : Cryogenic standard rental ====
 +
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| 1 cryogenic standard and support instrumentation ​  | 7 k€ (Transportation,​ installation) ​    | 2 k€ / day (8 hrs)        |
 +
 +==== Frequency calibration over GNSS service ====
 +
 +SYREF2.5
 +^ Hardware description ​     ^ GNSS unit cost        ^ Service (yearly) ​         ^
 +| SYREF v 2.5 GNSS receiver and processing unit | 6 k€      | 4 k€ / year         |
 +
 +Service include 12 monthly certificates of calibration,​ automated data transfer (in and out), data processing, technical support on a 8x5 basis, maintainance and data monitoring. This service is intended to provide the user's local frequency standard with a frequency traceability to UTC via the french national reference UTC(OP) at 1x10<​sup>​-13</​sup>​ level (after 30 days). This service can be found in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-06.pdf|2-06 accredited scope]] (internal procedure PT-54). Contact us for detailed information about the service requirements and operation.
 +
 +(This service is covered by the Arrangement for Mutual Recognition [[https://​www.bipm.org/​en/​cipm-mra/​objectives.html(CIPM MRA)]]{{:​cipm_mra_logo-big.png?​100|}}) ​
 ===== Accredited and Certified Measurements ==== ===== Accredited and Certified Measurements ====
  
Line 15: Line 49:
  
 Through the  LNE-LTFB brand, we are at the top level of the French metrological chain for Through the  LNE-LTFB brand, we are at the top level of the French metrological chain for
-  - Phase Noise measurements,​ i.e. L(f) or Sphi(f) +    * Phase Noise measurements,​ i.e. L(f) or Sphi(f) 
-  ​- ​Frequency Stability, i.e., Allan Variance +    ​* ​Frequency Stability ​(short term, < 100s), i.e., Allan Variance 
 +Check the complete and up-to-date description of those lines in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-13.pdf|2-13 accredited scope]] ​
  
 +LNE-LTFB also provide accredited certificates of calibration for the following quantities ​
 +  *  time interval
 +  *  frequency ​
 +  *  frequency stability (long term > 100s)
 +Covered instrumentation include frequency standards, time/​frequency counters, pulse generators, chronograph,​ clock watches.
  
 +The complete and up-to-date description of those lines in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-06.pdf|2-06 accredited scope]] ​
  
 +(Those services are covered by the Arrangement for Mutual Recognition [[https://​www.bipm.org/​en/​cipm-mra/​objectives.html|(CIPM MRA)]]{{:​cipm_mra_logo-big.png?​100|}}) ​
  • services.txt
  • Last modified: 2019/03/22 14:31
  • by jmzint