Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
services [2018/03/05 14:03]
127.0.0.1 external edit
services [2019/03/22 14:31]
jmzint [Frequency calibration over GNSS service]
Line 8: Line 8:
 Contact us at [[contacts|Contacts]],​ and explain your problem Contact us at [[contacts|Contacts]],​ and explain your problem
  
 +===== Access services (instrumentation,​ frequency standards, ...) ====
 +Below are a few indicative available services and related fees for physical access to
 +the platform and its instrumentation.
 +Contact us for any details or tailored services you might need.
 +==== Platform Access ====
 +=== AP1 : access to basic instrumentation and environment ===
 +Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation,​ reception and installation at the facility.
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| Symmetricom 5125 and spectrum analyser ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| Network analyser ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| EMC receiver ​ | 100 €     | 200 € / day (8hrs) ​       |
 +| Phase noise measurement bench  | 150 € | 300 € / day (8hrs)|
 +| FSWP (Rohde & Schwarz) + environment devices | 150 € | 450 € / day (8hrs)|
 +| Technical assistance and expertise ​   |      | 80-120 € / hour        |
  
 +=== AP2 : access to high end metrology and advanced instrumentation ===
 +Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation,​ reception and installation at the facility.
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| Access to cryogenic standards ​ | 500 €     | 400 € / day (8 hrs)        |
 +| Acces to optical standards ​ | 500 €     | 800 € / day (8 hrs)        |
 +| Technical assistance and scientific expertise | 100 €     | 100-150 ​ € / hour        |
  
 +==== CRYO1 : Cryogenic standard rental ====
 +
 +^ Instruments ​     ^ Fixed fee       ^ Daily Rate          ^
 +| 1 cryogenic standard and support instrumentation ​  | 7 k€ (Transportation,​ installation) ​    | 2 k€ / day (8 hrs)        |
 +
 +==== Frequency calibration over GNSS service ====
 +
 +SYREF2.5
 +^ Hardware description ​     ^ GNSS unit cost        ^ Service (yearly) ​         ^
 +| SYREF v 2.5 GNSS receiver and processing unit | 6 k€      | 4 k€ / year         |
 +
 +Service include 12 monthly certificates of calibration,​ automated data transfer (in and out), data processing, technical support on a 8x5 basis, maintainance and data monitoring. This service is intended to provide the user's local frequency standard with a frequency traceability to UTC via the french national reference UTC(OP) at 1x10<​sup>​-13</​sup>​ level (after 30 days). This service can be found in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-06.pdf|2-06 accredited scope]] (internal procedure PT-54). Contact us for detailed information about the service requirements and operation.
 +
 +(This service is covered by the Arrangement for Mutual Recognition [[https://​www.bipm.org/​en/​cipm-mra/​objectives.html|(CIPM MRA)]]{{:​cipm_mra_logo-big.png?​100|}}) ​
 ===== Accredited and Certified Measurements ==== ===== Accredited and Certified Measurements ====
  
Line 15: Line 49:
  
 Through the  LNE-LTFB brand, we are at the top level of the French metrological chain for Through the  LNE-LTFB brand, we are at the top level of the French metrological chain for
-  - Phase Noise measurements,​ i.e. L(f) or Sphi(f) +    * Phase Noise measurements,​ i.e. L(f) or Sphi(f) 
-  ​- ​Frequency Stability, i.e., Allan Variance +    ​* ​Frequency Stability ​(short term, < 100s), i.e., Allan Variance 
 +Check the complete and up-to-date description of those lines in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-13.pdf|2-13 accredited scope]] ​
  
 +LNE-LTFB also provide accredited certificates of calibration for the following quantities ​
 +  *  time interval
 +  *  frequency ​
 +  *  frequency stability (long term > 100s)
 +Covered instrumentation include frequency standards, time/​frequency counters, pulse generators, chronograph,​ clock watches.
  
 +The complete and up-to-date description of those lines in our [[http://​www.cofrac.fr/​annexes/​sect2/​2-06.pdf|2-06 accredited scope]] ​
  
 +(Those services are covered by the Arrangement for Mutual Recognition [[https://​www.bipm.org/​en/​cipm-mra/​objectives.html|(CIPM MRA)]]{{:​cipm_mra_logo-big.png?​100|}}) ​
  • services.txt
  • Last modified: 2019/03/22 14:31
  • by jmzint