Differences

This shows you the differences between two versions of the page.

--- services [2019/03/22 14:29]
jmzint [Accredited and Certified Measurements]
+++ services [2022/03/21 13:23] (current)
rubiola
@@ Line 9: / Line 9: @@
 ===== Access services (instrumentation, frequency standards, ...) ====
-Below are a few indicative available services and related fees for physical access to
+Below are a few indicative available services for physical access to
 the platform and its instrumentation.
 Contact us for any details or tailored services you might need.
@@ Line 15: / Line 15: @@
 === AP1 : access to basic instrumentation and environment ===
 Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation, reception and installation at the facility.
-^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+^ Instruments
-| Symmetricom 5125 and spectrum analyser  | 100 €     | 200 € / day (8hrs)        |
+| Symmetricom 5125 and spectrum analyser          |
-| Network analyser  | 100 €     | 200 € / day (8hrs)        |
+| Network analyser          |
-| EMC receiver  | 100 €     | 200 € / day (8hrs)        |
+| EMC receiver         |
-| Phase noise measurement bench  | 150 € | 300 € / day (8hrs)|
+| Phase noise measurement bench  |
-| FSWP (Rohde & Schwarz) + environment devices | 150 € | 450 € / day (8hrs)|
+| FSWP (Rohde & Schwarz) + environment devices |
-| Technical assistance and expertise    |      | 80-120 € / hour        |
+| Technical assistance and expertise       |
 === AP2 : access to high end metrology and advanced instrumentation ===
 Provision of the platform instruments ; access to a SI traceable HMaser, environment instrumentation, reception and installation at the facility.
-^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+^ Instruments               ^
-| Access to cryogenic standards  | 500 €     | 400 € / day (8 hrs)        |
+| Access to cryogenic standards         |
-| Acces to optical standards  | 500 €     | 800 € / day (8 hrs)        |
+| Acces to optical standards        |
-| Technical assistance and scientific expertise | 100 €     | 100-150  € / hour        |
+| Technical assistance and scientific expertise         |
 ==== CRYO1 : Cryogenic standard rental ====
-^ Instruments      ^ Fixed fee       ^ Daily Rate          ^
+^ Instruments       ^
-| 1 cryogenic standard and support instrumentation   | 7 k€ (Transportation, installation)     | 2 k€ / day (8 hrs)        |
+| 1 cryogenic standard and support instrumentation          |
 ==== Frequency calibration over GNSS service ====
@@ Line 43: / Line 43: @@
 Service include 12 monthly certificates of calibration, automated data transfer (in and out), data processing, technical support on a 8x5 basis, maintainance and data monitoring. This service is intended to provide the user's local frequency standard with a frequency traceability to UTC via the french national reference UTC(OP) at 1x10<sup>-13</sup> level (after 30 days). This service can be found in our [[http://www.cofrac.fr/annexes/sect2/2-06.pdf|2-06 accredited scope]] (internal procedure PT-54). Contact us for detailed information about the service requirements and operation.
-(This service is covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/en/cipm-mra/objectives.html(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})
+(This service is covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/en/cipm-mra/objectives.html|(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})
-===== Accredited and Certified Measurements ====
+===== Accredited laboratory ====
 Our lab is affiliated to LNE through the brand LNE-LTFB, which combines the TF Department of the FEMTO-ST Institute and the TF Team of UTINAM (Observatory of Besancon) in a single entity.
@@ Line 51: / Line 51: @@
     * Phase Noise measurements, i.e. L(f) or Sphi(f)
     * Frequency Stability (short term, < 100s), i.e., Allan Variance
-Check the complete and up-to-date description of those lines in our [[http://www.cofrac.fr/annexes/sect2/2-13.pdf|2-13 accredited scope]]
+Check the complete and up-to-date description of those lines and the list of calibration sites in our [[http://www.cofrac.fr/annexes/sect2/2-13.pdf|2-13 accredited scope]]
 LNE-LTFB also provide accredited certificates of calibration for the following quantities
@@ Line 59: / Line 59: @@
 Covered instrumentation include frequency standards, time/frequency counters, pulse generators, chronograph, clock watches.
-The complete and up-to-date description of those lines in our [[http://www.cofrac.fr/annexes/sect2/2-06.pdf|2-06 accredited scope]]
+The complete and up-to-date description of those lines and the list of calibration sites in our [[http://www.cofrac.fr/annexes/sect2/2-06.pdf|2-06 accredited scope]]
-(Those services are covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/en/cipm-mra/objectives.html(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})
+(Those services are covered by the Arrangement for Mutual Recognition [[https://www.bipm.org/fr/cipm-mra/|(CIPM MRA)]]{{:cipm_mra_logo-big.png?100|}})